Peterson 1710D Horizontal Grinder

Overview

Heavy duty and mobile, the 1710D Horizontal Grinder can readily reduce a wide range of materials.

The 1710D’s large feed opening, measures 54″ x 27″ (137 x 69 cm). When boosted by Peterson’s high-lift feed roll, the feed opening’s maximum lift of 41.5 inches (105 cm) can tackle the largest of feedstock, and allows excellent accessibility to the rotor for maintenance.

The 1710D Horizontal Grinder is equipped with a Caterpillar Tier IV C9.3B 455 hp (Stage V, 339 kW) engine, or an optional, export-only C9.3B Tier III, 415 hp (309 kW) engine. At 46,500 pounds (21,092 kg), it is one of the lightest of Peterson’s grinder series, and is easily transportable.

The 1710D Horizontal Grinder features a quick-change multiple grate system, making it easy to customize grate configurations. Grates are removed through an easy-access door on the side wall. With Peterson’s patented up-turn rotor, and heavy-duty bits, and robust anvil, the 1710D has an exceptional wear life and accurate product sizing.

Astec Peterson 1710D Horizontal Grinder

Applications

  • Organic Recycling

    Green waste recycling is fresh or biodegradable waste material including grass, leaves, plants and tree trimmings that can be diverted from landfills for recycling. This method is best used to produce compost for use on gardens, lawns, erosion control projects and agricultural crops.
    Learn More

  • Wood Waste Recycling

    Wood waste is the second largest category of construction and demolition (C&D) debris, and accounts for 10% of material added to landfills annually.
    Learn More

  • Land Clearing

    Land clearing generally consists of trees, limbs and roots cleared from forested or partially forested land that will be used for a new purpose including farming, commercial development or right-of-ways.

    Learn More

  • Mulch

    Organic mulch is a product that can decompose, providing nutrients to the soil over time. It can be made from a variety of materials, typically organic, but not exclusively.
    Learn More

  • Biomass

    Biomass is an energy source derived from renewable and sustainable organic materials to create electricity or other forms of power. Horizontal grinders and drum chippers are highly productive machines for creating biomass.
    Learn More

Downloads

Key Specifications

 

DimensionsSpecifications
Operating Length1008 cm
Operating Width288 cm
Operating Height348 cm
Travel Width250 cm
Travel Length1009 cm
Travel Height348 cm
Frame Length859 cm
Front Angle of Approach11º
Rear Angle of Approach27º
Ground Clearance36 cm

 

 

DimensionsSpecifications
Operating Length33' 1" 
Operating Width9' 6" 
Operating Height11' 5" 
Travel Width8' 2" 
Travel Length33' 1" 
Travel Height11' 5" 
Frame Length28' 2" 
Front Angle of Approach11º
Rear Angle of Approach27º
Ground Clearance14" 

 

SpecificationsWeights
Machine Weight21 092 kg
Specifications 
Machine Weight46,500 lbs

 

PowertrainSpecifications
Engine

Cat C9.3B Tier IV, EU Stage V, 339 kW

Cat C9.3B Tier III, 309 kW (export only)

ClutchPT Tech SCT 2500
Fuel Tank Capacity553 L
Main Hydraulic Tank Capacity272 L
DEF Tank Capacity65 L

 

PowertrainSpecifications
Engine

Cat C9.3B Tier IV, 455 hp

Cat C9.3B Tier III, 415 hp (export only)

ClutchPT Tech SCT 2500
Fuel Tank Capacity146 US gal 
Main Hydraulic Tank Capacity72 US gal 
DEF Tank Capacity17 US gal 

 

System Controls  
Adaptive Control System

Radio Remote

Peterson+ Analytics
System Controls 
Adaptive Control System

Radio Remote

Peterson+ Analytics
TracksSpecifications
Track Type & Widthtriple grouser, 40 cm
Travel Speed1.1/2.1 kph
Ground Pressure0.81 kg/cm2 
Track Length396 cm
Front to Track Length328 cm

 

TracksSpecifications
Track Type & Widthtriple grouser, 15.75"
Travel Speed0.7/1.3 mph
Ground Pressure11.5 lbs/in²
Track Length13' 0"
Front to Track Length10' 9"

 

ModelSpecification
Feed Opening (w x h) 137 x 69 cm
Hopper Width 137 cm
Feed Conveyor Width 137 cm
Feed Chain 4 sections, full hopper width
Compression Roll Diameter 61 cm
Land Clearing Mode 137 x 105 cm

 

ModelSpecification
Feed Opening (w x h)54" x 27" 
Hopper Width54" 
Feed Conveyor Width4'6" 
Feed Chain4 sections, full hopper width
Compression Roll Diameter24" 
Land Clearing Mode54" x 41.5" 

 

Rotor Specifications
Rotor Width 141 cm
Rotor Diameter 67 cm
Rotor Shaft Size 110 mm @ bearing, 120 mm @ center
Bit Size 63 x 114 mm
Number of Bits 22 drum rotor, 18 pinned rotor 
Rotor Speed 3050 mpm @ 2200 rpm 
Rotor Specifications
Number of Grate Sections 3
Total Grate Area 1.5 m² 
Grate Coverage 174º
Grate Thickness 19 mm

 

RotorSpecifications
Rotor Width55.5" 
Rotor Diameter26.5” 
Rotor Shaft Size4.33" @ bearing, 4.75" @ center
Bit Size2.5" x 4.5" 
Number of Bits22 drum rotor, 18 pinned rotor 
Rotor Speed10,000 fpm @2200 rpm
RotorSpecifications
Number of Grate Sections3
Total Grate Area2246 in² 
Grate Coverage174º
Grate Thickness3/4" 

 

DischargeCompact ConveyorFolding Conveyor
Discharge Conveyor Width107 cm107 cm
Conveyor Height292 cm429 cm
Conveyor Speed152 or 183 mpm152 or 183 mpm

DischargeCompact ConveyorFolding Conveyor
Discharge Conveyor Width3' 6" 3' 6"
Discharge Conveyor Height9' 7" 14' 1" 
Conveyor Speed500 or 600 fpm 500 or 600 fpm 

 

Production Volume Weight
Greenwaste 107 m³ 35 tonnes
Scrap Board 141 m3  27 tonnes

*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.

Production Volume Weight
Greenwaste 140 yd³  39 tons 
Scrap Board 185 yd³  30 tons 

*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.

UNITS:

All specifications subject to change without notice.

Features

  • A diagram showing Astec's Peterson Horizontal Grinder's 3-Stage Grinding Process

    3-Stage Grinding Process

    The powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers want.

    A diagram showing Astec's Peterson Horizontal Grinder's 3-Stage Grinding Process
  • A close-up view of a Peterson Horizontal Grinder's Impact Release System airbag from a 4710D

    Impact Release System Protects Your Investment

    The air bags on the patented Astec Impact Release System provide uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.

    A close-up view of a Peterson Horizontal Grinder's Impact Release System airbag from a 4710D

  • The Second Line of Defense: The Impact Cushion System

    Urethane cushions and shear pins help protect the mill from catastrophic damage in the event of a severe impact from contaminants in the feedstock.

Media Gallery

UNITS:
Compare Horizontal Grinders
 Current Item    
Compare Horizontal Grinders
 1710D2710D4710D5710D6710D
Standard EngineCAT C9.3B EU Stage V, 339 kWCAT C15 Tier IV, 580 hpCAT C18 Tier IV, 563 kWCAT C27 Tier IV, 782 kWCAT C32 Tier IV, 839 kW
Scrap Board Production*141 m³247 m³325 m³452 m³499 m³
Feed Opening 137 x 69 cm153 x 81 cm152 x 97 cm152 x 102 cm 168 x 127 cm
Weight21,092 kg28,123 kg35,834 kg43,091 kg48,987 kg

*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.

Compare Horizontal Grinders
 Current Item    
Compare Horizontal Grinders
 1710D2710D4710D5710D6710D
Standard EngineCAT C9.3B Tier IV 455 hpCAT C15 Tier IV, 580 hpCAT C18 Tier IV, 755 hpCAT C27 Tier IV, 1050 hpCAT C32 Tier IV, 1125 hp
Scrap Board Production*185 yd³368 yd³ 425 yd³591 yd³ 653 yd³
Feed Opening 54” x 27”60” x 32” 60” x 38”60” x 40” 66” x 50”
Weight46,500 lbs 68,100 lbs79,000 lbs95,000 lbs 108,500 lbs

*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.

Loading animation

Request More Info

Are you looking for information on Parts?
Your information is safe. Check our privacy notice for more details.

Related Products

  • Peterson 1700D Horizontal Grinder

  • Peterson 2710D Horizontal Grinder