Peterson 2750D Electric Horizontal Grinder

Overview

The 2750D electric horizontal grinder is ideal for operations that can take advantage of stationary or semi-stationary operations.

Powered by a single 600 horsepower (450 kW) electric motor, the Peterson 2750D has plenty of power. Since electric power costs are typically much lower than diesel fuel costs, electric power may just be the answer for increasing your profits.

With a feed opening of 60¾ x 32 inches (154 x 81 cm) combined with Peterson’s high lift feed roll for an optional opening up to 44 inches (112 cm) high, the 2750D can reduce a diverse range of raw materials.

Applications

Organic Recycling

Green waste recycling is fresh or biodegradable waste material including grass, leaves, plants and tree trimmings that can be diverted from landfills for recycling. This method is best used to produce compost for use on gardens, lawns, erosion control projects and agricultural crops.
Learn More
Mulch

Organic mulch is a product that can decompose, providing nutrients to the soil over time. It can be made from a variety of materials, typically organic, but not exclusively.
Learn More
Wood Waste Recycling

Wood waste is the second largest category of construction and demolition (C&D) debris, and accounts for 10% of material added to landfills annually.
Learn More
Biomass

Biomass is an energy source derived from renewable and sustainable organic materials to create electricity or other forms of power. Horizontal grinders and drum chippers are highly productive machines for creating biomass.
Learn More
Asphalt Shingle Recycling

Asphalt shingle grinding is the process of making recycled asphalt shingles (RAS). RAS is produced by grinding asphalt roofing shingles to a small spec, generally under 3/8” to salvage the valuable asphalt and sand.
Learn More
Natural Disaster Cleanup

Natural disasters such as hurricanes, tornadoes, earthquakes, fires or floods create debris that must be cleared to restore affected areas. This type of debris can be green waste (such as tree limbs), furniture, drywall or entire structures that have to be demolished and recycled.
Learn More

Downloads

Horizontal Grinder Brochure
Download (pdf) 11 MB
Astec Peterson 2750D Horizontal Grinder Spec Sheet English
Download (pdf) 3 MB

Key Specifications

Dimensions	Specifications
Operating Length	16 m
Operating Width	277 cm
Operating Height	511 cm
Travel Width	277 cm
Travel Length	1217 cm
Travel Height	191 cm
Frame Length	1173 cm
Ground Clearance	27 cm
Axle Spacing	152 cm
Front to 5th Wheel	180 cm
5th Wheel to Center Rear Axle	937 cm
5th Wheel Clearance Radius	183 cm
5th Wheel Height	124 cm

Dimensions	Specifications
Operating Length	52' 6"
Operating Width	9' 1"
Operating Height	16' 9"
Travel Width	9' 1"
Travel Length	39' 11"
Travel Height	11' 6"
Frame Length	38' 6"
Ground Clearance	10 "
Axle Spacing	60"
Front to 5th Wheel	5' 11"
5th Wheel to Center Rear Axle	30' 9"
5th Wheel Clearance Radius	6'
5th Wheel Height	3' 8"

Weights	Specifications
Machine Weight	Approx. 24,500 kg
5th Wheel Weight	Approx. 9,525 kg
Tandem Axle Weight	Approx. 14,970 kg

Weights	Specifications
Machine Weight	Approx. 54,000 lbs
5th Wheel Weight	Approx. 21,000 lbs
Tandem Axle Weight	Approx. 33,000 lbs

Powertrain	Specification
Electric Power	USA: 460 volt, 60Hz, 3-phase electric Europe: 400 volt, 50Hz, 3-phase electric Canada: 575 volt, 60Hz, 3-phase electric
	Europe: 400 volt, 50Hz, 3-phase electric
Rotor Drive Motors	crusher duty, 2 x 447 kW
Hydraulic System Motor	high efficiency 75 kW
Main Hydraulic	360 L

Powertrain	Specification
Electric Power	USA: 460 volt, 60Hz, 3-phase electric Europe: 400 volt, 50Hz, 3-phase electric Canada: 575 volt, 60Hz, 3-phase electric
	Europe: 400 volt, 50Hz, 3-phase electric
Rotor Drive Motors	crusher duty, 2 x 600 hp
Hydraulic System Motor	high efficiency 100 hp
Main Hydraulic Tank Capacity	95 gal

System Controls
Adaptive Control System	Checkmark
Radio Remote	Checkmark
Peterson+ Analytics	Checkmark

System Controls
Adaptive Control System	Checkmark
Radio Remote	Checkmark
Peterson+ Analytics	Checkmark

Model	Specification
Feed Opening (w x h)	153 x 81 cm
Hopper Width	152 cm
Feed Conveyor Width	147 cm
Feed Chain	4 sections, full hopper width
Compression Roll Diameter	71 cm
Land Clearing Mode	153 x 112 cm

Model	Specification
Feed Opening (w x h)	60" x 32"
Hopper Width	60"
Feed Conveyor Width	4'10"
Feed Chain	4 sections, full hopper width
Compression Roll Diameter	28"
Land Clearing Mode	60" x 44"

Rotor	Specifications
Rotor Width	152 cm
Rotor Diameter	81 cm
Rotor Shaft Size	130 mm @ bearing, 146 mm @ center
Bit Size	70 x 127 mm
Number of Bits	20 drum rotor, 18 pinned rotor, 30 ASG rotor
Rotor Speed	3048 mpm @ 2100 rpm
Rotor	Specifications
Number of Grate Sections	4
Total Grate Area	1.95 m²
Grate Coverage	180º
Grate Thickness	25 mm

Rotor	Specifications
Rotor Width	60"
Rotor Diameter	32"
Rotor Shaft Size	5" @ bearing, 5.75" @ center
Bit Size	2.75" x 5"
Number of Bits	20 drum rotor, 18 pinned rotor, 30 ASG rotor
Rotor Speed	10,000 fpm @2100 rpm
Rotor	Specifications
Number of Grate Sections	4
Total Grate Area	21 ft²
Grate Coverage	180º
Grate Thickness	1"

Discharge	Specifications
Discharge Conveyor Width	122 cm
Discharge Conveyor Height	511 cm
Conveyor Speed	152, 183, or 213 mpm

Discharge	Specifications
Discharge Conveyor Width	48"
Discharge Conveyor Height	16' 9"
Conveyor Speed	500, 600, or 700 fpm

Production	Volume	Weight
Greenwaste	201 m³	70 tonnes
Scrap Board	247 m³	50 tonnes

*Actual production output may vary due to moisture content, material density and size, support equipment, grate size, and equipment options. Production rates are based on operating 50 minutes per hour with the standard diesel engine.

Production	Volume	Weight
Greenwaste	264 yd³	77 tons
Scrap Board	323 yd³	55 tons

Options	2750D
Magnetic Head Pulley	Checkmark
LED work Lights	Checkmark
Dust Control	Checkmark
Crossbelt Magnet	Checkmark
Scrap Metal collection box	Checkmark
Export kit	Checkmark
CE Certification	Not applicable
Feed Tailgate	Checkmark
Cold Weather Kit	Not applicable
Air Compressor	Not applicable
R+ Package	Not applicable
ASG Package	Checkmark
Flat Feed Deck	Checkmark
Liquid Injection System	Not applicable
Tow Dolly	Not applicable
Extra-Long Discharge Conveyor	Checkmark

Options	2750D
Magnetic Head Pulley	Checkmark
LED work Lights	Checkmark
Dust Control	Checkmark
Crossbelt Magnet	Checkmark
Scrap Metal collection box	Checkmark
Export kit	Checkmark
CE Certification	Not applicable
Feed Tailgate	Checkmark
Cold Weather Kit	Not applicable
Air Compressor	Not applicable
R+ Package	Not applicable
ASG Package	Checkmark
Flat Feed Deck	Checkmark
Liquid Injection System	Not applicable
Tow Dolly	Not applicable
Extra-Long Discharge Conveyor	Checkmark

UNITS:

All specifications subject to change without notice.

Features

3-Stage Grinding Process

The powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers want.
Impact Release System Protects Your Investment

The air bags on the patented Astec Impact Release System provide uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders.