Peterson 5000H Whole Tree Chipper
Overview
The Peterson 5000H Whole Tree Chipper produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation.
Equipped with a large feed throat, the 5000H Whole Tree Chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems.
The 5000H Whole Tree Chipper can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The standard three-pocket disc produces chips from 5⁄8 to 1 1/4 inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 100 tons (90 tonnes) per hour can be achieved depending on chip size and wood characteristics.
Downloads
Key Specifications
| Chipper | Specifications | Specifications |
|---|---|---|
| Drum Size | heavy duty, 66" diameter | heavy duty, 168 cm diameter |
| Knife Pockets | 3 or 4 pockets | 3 or 4 pockets |
| Knife Systems | Babbitt or Key Knife™ | Babbitt or Key Knife™ |
| Discharge Spout | hydraulic swivel top or end loading | hydraulic swivel top or end loading |
| Chip Size | 1/2" to 1 1/4" | 13 to 32 mm |
| Chipper | Specifications |
|---|---|
| Drum Size | heavy duty, 66" diameter |
| Knife Pockets | 3 or 4 pockets |
| Knife Systems | Babbitt or Key Knife™ |
| Discharge Spout | hydraulic swivel top or end loading |
| Chip Size | 1/2" to 1 1/4" |
| Dimensions | Specifications |
|---|---|
| Operating Length | 1563 cm |
| Operating Width | 357 cm |
| Travel Length | 1630 cm |
| Travel Width | 354 cm |
| Travel Height | 411 cm |
| Frame Length | 1,541 cm |
| Front Ground Clearance | 89 cm |
| Rear Ground Clearance | 27 cm |
| Ground Clearance | 33 cm |
| Axle Spacing | 152 cm |
| Front to 5th Wheel | 1271 cm |
| 5th Wheel to Center Axle | 1271 cm |
| 5th Wheel to Rear Axle | 1,422 cm |
| 5th Wheel Height | 126 cm |
| Dimensions | Specifications |
|---|---|
| Operating Length | 51' 3" |
| Operating Width | 11' 9" |
| Travel Length | 53' 6" |
| Travel Width | 11' 7" |
| Travel Height | 13' 6" |
| Frame Length | 50' 6" |
| Front Ground Clearance | 2' 11" |
| Rear Ground Clearance | 10" |
| Ground Clearance | 13" |
| Axle Spacing | 60" |
| Front to 5th Wheel | 2' 2" |
| 5th Wheel to Center Axle | 41' 9" |
| 5th Wheel to Rear Axle | 46' 8" |
| 5th Wheel Height | 4' 2" |
| Dimensions | Specifications |
|---|---|
| tri-Axle Weight | 27 197 kg |
| 5th Wheel Weight | 20 412 kg |
| Total Weight | 46 947 kg |
| Dimensions | Specifications |
|---|---|
| tri-Axle Weight | 59,960 lbs |
| 5th Wheel Weight | 45,000 lbs |
| Total Weight | 103,500 lbs |
| Dimensions | Specifications |
|---|---|
| Engine | CAT C27 708 kW or 783 kW CAT C32 708 kW, 839 kW or 895 kW |
| Clutch | PT Tech HPTO 15 |
| Fuel Tank Capacity | 1420 L |
| Hydraulic Tank Capacity | 1211 L |
| System Controls | |
| Adaptive Control System | Checkmark |
| Radio Remote | Checkmark |
| Peterson+ Analytics | Checkmark |
| Dimensions | Specifications |
|---|---|
| EngineCAT | C27 950 hp or 1050 hp |
| CAT C32 950 hp 1125 hp or 1200 hp | |
| Clutch | PT Tech HPTO 15 |
| Fuel Tank Capacity | 375 gal |
| Hydraulic Tank Capacity | 320 gal |
| System Controls | |
| Adaptive Control System | Checkmark |
| Radio Remote | Checkmark |
| Peterson+ Analytics | Checkmark |
| Feed System | Specifications |
|---|---|
| Feed Opening (w x h) | 133 x 61 cm |
| Feed Speed Range | 19 to 52 m/min |
| Maximum Log Diameter | 56 cm |
| Feed Rolls | dual with floating top rolls |
| Lower Feed Rolls | 7 powered |
| Log Loader | |
| Lift Capacity | 5376 kg at 457 cm |
| Hydraulic Knuckle Boom | 2-section, 818 cm |
| Grapple with Heel Rack | 360° rotation, 107 cm |
| Controls | two lever electronic joystick |
| Enclosed Weatherized Operator's Cab | with Air Conditioner |
| Feed System | Specifications |
|---|---|
| Feed Opening (w x h) | 53" w x 24" h |
| Feed Speed Range | 64 to 170 ft/min |
| Maximum Log Diameter | 23" |
| Feed Rolls | dual with floating top rolls |
| Lower Feed Rolls | 7 powered |
| Log Loader | |
| Lift Capacity | 11,851 lbs at 15' |
| Hydraulic Knuckle Boom | 2-section, 26' 10" |
| Grapple with Heel Rack | 360° rotation, 42" |
| Controls | two lever electronic joystick |
| Enclosed Weatherized Operator's Cab | with Air Conditioner |
| Delimber/Debarker Flail | Specifications |
|---|---|
| Flail Drums | single lower and dual floating upper |
| Drum Diameter | 27 cm |
| Flail Rods/Drum | 6 per drum |
| Flail Chain/Drum | 78 chains, 8 links each |
| Drive Type | hydrostatic |
| Flail Speed Range | 400 to 700 rpm |
| End Discharge Bark Mover | 305 x 61 cm |
| Variable Flail Speed | adjustable from cab |
| Delimber/Debarker Flail | Specifications |
|---|---|
| Flail Drums | single lower and dual floating upper |
| Drum Diameter | 11" |
| Flail Rods/Drum | 6 per drum |
| Flail Chain/Drum | 78 chains, 8 links each |
| Drive Type | hydrostatic |
| Flail Speed Range | 400 to 700 rpm |
| End Discharge Bark Mover | 120" x 24" |
| Variable Flail Speed | adjustable from cab |
UNITS:
All specifications subject to change without notice.
Features
Media Gallery
Find Astec product availability nearby
